Knight Wall Systems’ ADJUSTAKLIP is a thermally improved cladding support that gives installers up to 1-1/2 inches of adjustment at the rail to correct wall irregularities and hold a consistent cladding plane.
Facade crews dealing with out-of-tolerance walls get a new tool from Knight Wall Systems, which said Nov. 9 from Deer Park, Washington, that it has introduced ADJUSTAKLIP, an adjustable, thermally improved cladding support for straight, plumb facades.
Knight designed the system for demanding facade work and for use with high-performance rainscreen wall assemblies.
“ADJUSTAKLIP delivers exceptional in-and-out adjustability, vertical or horizontal rail configurations, and compatibility with a wide range of cladding materials,” said Brian Nelson, Director of Sales, Engineering & Marketing at Knight Wall Systems. “And it easily corrects wall irregularities to achieve a consistent cladding plane.”
At the rail, installers can fine-tune ADJUSTAKLIP by as much as 1-1/2 inches. With the bracket fully nested, the L-rail sits flush with the insulation face, and crews then move it outward to reach the facade line they want.
Assemblies as deep as 8-1/2 inches are supported, and rails can run either vertically or horizontally. A built-in indicator marks the maximum adjustment so installers keep the parts properly engaged and the system performing over time.
Substrates include steel studs, wood studs, CMU and concrete, with the bracket mounted in either direction. Anchor holes come pre-punched to speed the work, and exterior mineral wool insulation fits snugly around each bracket with little trimming in the field, cutting labor and keeping continuous insulation intact.
Both the bracket and the L-rail are non-combustible, and the system carries cladding loads as high as 25 PSF. According to Knight, corrosion resistance is up to 10 times greater than G90 galvanized steel, and buyers can choose a black finish or stainless steel.
Buyers can order ADJUSTAKLIP on its own or as one piece of a full Knight Wall Systems facade package that adds rails, thermally isolated wall anchors and engineering support tailored to the project. A 10-year limited warranty covers the system, with Knight taking single-source responsibility from design to installation.
Based in Deer Park, Washington, Knight Wall Systems develops rainscreen and thermal isolation technology for building facades across North America.
Key features include:
- Up to 1-1/2 inches of built-in adjustment at the rail, plus shims if needed
- Wall assembly depths up to 8-1/2 inches
- Vertical or horizontal rail configurations
- Non-combustible bracket and L-rail
- Supports cladding loads up to 25 PSF
- Mounts on steel or wood studs, CMU and concrete
- Black finish or stainless steel; 10-year limited warranty





