Low-Expansion Kraken Bond Gasket Foam Seals the Drywall-to-Stud Joint Before Walls Close Up

Kraken Bond now offers SF 404 AeroSeal Gasket Foam for Drywall & Framing, a 14 oz gun-applied polyurethane foam that closes air leaks where drywall meets framing, a spot that is hidden for good once the board goes up.

Kraken Bond, a Chantilly, Virginia, manufacturer of chemical products for construction and industrial work, announced Nov. 12, 2026, that its SF 404 AeroSeal Gasket Foam for Drywall & Framing is now available. The one-component polyurethane gun foam comes in a 14 oz can and is aimed at air leakage at the joint between drywall and framing. The company timed the launch to builders wrapping up interiors before year-end final inspections.

Air tightness is a growing factor in residential work. The 2021 International Energy Conservation Code from the International Code Council requires air leakage testing on new homes. Under the prescriptive path, homes must reach a maximum of 5 ACH50 in Climate Zones 0 to 2 and a maximum of 3 ACH50 in Climate Zones 3 to 8, per Section R402.4.1.3. Adoption depends on the state and local jurisdiction. Because blower door tests usually happen late in the build, after drywall is up, leaks behind finished walls can be hard and expensive to fix if the house fails.

Common leakage paths in light-frame construction include top and bottom plates, wall-to-floor and wall-to-ceiling connections, and seams between studs and drywall. A failed test can mean remediation and a retest, pushing back project closeout. Sealing those joints before hanging drywall treats them while they can still be reached.

The foam’s low-expansion formula is meant to help keep drywall from bowing or distorting, and it does not shrink. High elasticity lets it move with the structure and recover after minor compression, and the gun application gives installers control over bead placement. It is tack-free in about 7 minutes, fully cured in 24 hours, and can be used on metal or wood studs. It also adds supplemental thermal and sound insulation. Application temperatures run from 41 to 86 degrees Fahrenheit, and shelf life is 18 months. Contractors can buy single cans or multi-packs of up to 48 cans.

Kraken Bond points out that the foam is not a drywall adhesive, does not take the place of mechanical fasteners and is not for structural bonding. Used within a complete air-sealing system, the company says it may help support better blower door results.

“The drywall-to-framing joint is one of the last chances to seal the envelope before it is covered and hidden for the life of the building,” said a spokesperson for Kraken Bond. “A low-expansion formula matters here because it fills the gap without pushing against the drywall, which helps keep the surface flat and the seal continuous.”

The product is meant for framers, drywall and insulation installers, general contractors and smaller renovation firms on new residential and light-frame projects, and it also fits renovations where walls have been opened.

Key features include:

  • Low-expansion, one-component polyurethane gun foam, 14 oz can (SF 404)
  • No shrinkage; elastic, recovers after minor compression
  • Tack-free in about 7 minutes, full cure in 24 hours
  • Suits metal or wood studs; adds supplemental thermal and sound insulation
  • Application range 41 to 86 degrees Fahrenheit; 18-month shelf life
  • Single cans or multi-packs up to 48 cans
Alex Matthews
Alex Matthews
Alex is a member of our editorial team headquartered in Atlanta. He delivers updates on the building and construction industries in the United States from the mid-Atlantic to the southern Atlantic.

Popular Articles

Okibo Announces National Launch of EG7+ Robot Following Successful Premiere at Hensel Phelps Innovation Day

The EG7+ is suitable for high-wall applications, reaching 24 feet for sanding, painting, and level 4 finishing. Okibo, the industry leader in construction robotics innovation...

Roofr and QXO Partner to Bring Real-Time Pricing and Digital Material Ordering to Roofing Contractors

This cooperation seamlessly integrates QXO.com and Roofr CRM, providing roofing contractors with real-time material pricing and integrated material ordering through the Roofr platform. Roofr, the...

Corian Design Launches “WOW That’s Corian!” to Showcase the Evolution and Future Possibilities of Solid Surface Design

Corian Solid Surface has tremendous design adaptability thanks to its vast spectrum of colors and ability to be thermoformed, illuminated, engraved, and integrated into...

Andersen Windows Expands Commitment to Product Transparency and Sustainability with Three New Environmental Product Declarations Covering 14 Window Products

Andersen's new EPDs highlight its continued leadership in product openness. As EPDs become more widely recognized as critical tools for sustainable design, Andersen is...

CarbonBuilt Launches Commercial Production of Low Carbon Concrete Products in Connecticut

CarbonBuilt improves product quality while lowering the plant's carbon footprint by up to 70% by replacing up to 50% of cement with Reversa, decreasing...

RealAcoustix Officially Launches GuD Panel Acoustic Diffuser Line

GuD, based on patented quadratic residue optimization, reduces low-frequency absorption below the cutoff limit, resulting in a more than 250% boost in scattering performance...

TESCO Launches 326P and 326X Artificial Resistive Loads, Expanding Load Simulation Capabilities for Utility Meter Testing

Both versions are perfect for electric utility meter testing, verification, calibration, and troubleshooting processes since they handle common utility voltage ranges and are built...

Ramset Launches Cobra+ IFS Insulation Fastening System in U.S. Market

The Cobra+ platform is designed to be durable and reliable while penetrating concrete and steel, while also lowering noise and improving user comfort. Ramset, a...

Metabo HPT Launches Cordless Pneumatic Nailers for Framing Without Hose or Compressor

Metabo HPT’s new Cordless Pneumatics line uses an onboard Air Spring Drive System Plus to deliver pneumatic-like firing speed and drive consistency in fully...

Elevating Efficiency: Andersen Adds Triple-Pane Glass Option to 100 Series Product Portfolio

With the addition of triple-pane glass to our 100 Series products, we're increasing access to high-performance options that don't sacrifice style or cost. Andersen Windows,...

Acucraft Unveils New Line of Direct Vent Fireplaces Designed for Maximum Impact and Effortless Installation

Acucraft's direct vent fireplaces are designed to satisfy the needs of both design-conscious homeowners and discerning building professionals, providing clean-burning performance and modern appearance...

Fabcon Launches VersaCore Pro: The Next Generation of Precast Wall Systems

VersaCore Pro is a high-performance solution that combines the best engineering capabilities and design elements from Fabcon's portfolio. VersaCore Pro, the next iteration of...

All Weather Armour Announces the Launch of the First Hybrid Gutter Guard

The new hybrid gutter guard is a unique combination of two highly effective technologies. All Weather Armour, a leading creator in gutter protection and ice...

Tarkett unveils its Johnsonite 2026 Colors of the Year, inspired by wild earth

The palette—seven colors that were represented by nature, reproduced by Johnsonite, and translated into design—became apparent gradually. The Johnsonite 2026 Colors of the Year have...

Andersen Expands 100 Series Product Line to Include Double-Hung Window Option

The new double-hung option blends traditional practicality with modern performance, with upper and lower sashes that open to provide more ventilation and versatility. Andersen Windows,...

Discover the Beauty of Intentional Living With Dutch Boy Paints’ 2026 Color of the Year: Melodious Ivory

This inviting neutral reflects a cultural movement toward simplicity, genuineness, and deliberate living—qualities that are influencing how homeowners design and use their spaces. Dutch Boy...

Latest News

PROBuilder Partners